siFramo 100
Pivot Joint GE F 100/160
Application
Applicable as a bracing element for single-arm cantilevers in conjunction with siFramo 100/160 section, and for the knee-brace reinforcing of all frame constructions. The pivot can be installed with angles from 25° to 155°.
Scope of delivery
Pivot Joint GE F 100/160 with pre-attached 100/160 joining plate
Installation
Attachment of the Joints to the 160 mm face of Beam Section TP F 100/160 by means of 4 Self Forming Screws FLS F at the base plate. The support profile TP F 80 or TP F 100 (depending on joint type) plugged onto the octagon is also attached by means of 4 Self Forming Screws, so 8 Self Forming Screws are necessary in total.
After installation at the desired angle the screws have to be tightened with 40 Nm.
Technical Data
| Typ | Height H [mm] | Length L [mm] | Width B [mm] | Angle α |
|---|---|---|---|---|
| GE F 160 - 80 | 140 | 160 | 160 | 25° - 155° |
| GE F 160 - 100 | 180 | 160 | 160 | 25° - 155° |
| Material: | Steel, HCP |
Approvals / Conformity
