Pipe Shoe for High Temperature LD - HT HV
Application
Pipe Shoe - Dual Base for pipes on suitable surfaces. Height-adjustable in steps of 2.5 mm.
When resting on steel beams, a minimum flange width of 80 mm is recommended.
These pipe shoes are designed for use in the temperature range 300°C to 500°C. The material-dependent correction values k are used for determining the loads at real operating temperatures. To reach the expected temperatures, according to DIN EN 13480-3, Table 13.11.2–2 must be considered for the substructure.
Scope of delivery
The upper part and the two lower parts are bolted together allowing height adjustment. In order to reduce the spacings of the lugs the pipe clamps from DN 300 are rotated by 45° (see illustration).
Installation
To guarantee that both sliding plates rest correctly, both webs must be adjusted to exactly the same height.
Technical Data
Type | Height H as delivered [mm] | Height H Range [mm] | B [mm] DN 200 - 300 | B [mm] DN 350 - 600 |
---|---|---|---|---|
LD - HV 150 | 150 | 116 ... 168,5 | 285 | 325 |
LD - HV 200 | 200 | 171 ... 223,5 | 285 | 325 |
Tightening torque screw connections:
Clamping bolts | tightening torque [Nm] | height adjustment | tightening torque [Nm] |
---|---|---|---|
DN 250 - 600 | 60 | bolts in the bar | 80 |
Dimensions: | |
Metal plate: | L = 250 mm |
Material: | |
Sheet metal parts: | EN 10028-2 - 16Mo3, heat-resistant, powder-coated, black |
Bolts, Nuts of the height adjustment: | A4-80 |
Bolts, Nuts of the clamps: | A4-70 |
Media temperature: | 300°C up to 500°C |
Salt spray test: | Resistance > 500 hours |
Approvals / Conformity
Pipe Shoe - external monitoring PDF | 626.1 KB
Delivery time on request - Made-to-order goods.