Product catalogue

Universally applicable sound absorption element for higher loads. Suitable for soundproof installation according to DIN 4109. Especially suitable for sound isolation of constructions made of Channels 41 or electrical equipment, e.g. pumps or ventilators.

Adapter for additional connection options for all Sikla Pipe Clamps equipped with 3G triple thread nut, fixed points and threaded tubes. Adapter has internal threads on both sides.

Adapter for additional connection options for all Sikla Pipe Clamps equipped with 3G triple thread nut, fixed points and threaded tubes. Adapter has internal threads on both sides.

HCP Adapter for additional connection options for all Sikla Pipe Clamps equipped with 3G triple thread nut, fixed points and threaded tubes. Adapter has internal threads on both sides.

The Rubber-Metal Combination Element GMT suppresses vibrations originating from various systems. Such vibrations generated by the system (such as motors, boilers..) are normally transmitted as sound to the environment via rigid building structures. The mounting situation does not affect the efficiency of the Sikla Rubber-Metal Combination Element GMT, this element may also be applied as a horizontal stop buffer.

The Support Joint is fixed directly to the flanges of the pipe clamp to provide additional bracing to the overall pipe support. Adjustable brace angle. The Support Joint can be rotated 180° radially about the clamping bolt connections either side of the pipe clamp. Captive pivoting link eye.

The Flange Clamp Fit SFK can be used for downpipes ranging from DN 100 to DN 150 thanks to its flexible adjustment options – one bracket for three sizes! Preferably used in combination with Pipe Clamp Stabil D-A or, if sound absorption is required, with Stabil D-A with Lining (see below). Adjustable in two horizontal directions, thus ensuring an exact and tension-free run of vertical pipes. In case SFK Brackets from pipe manufactures are used, rubber rings are added as insulation.

Clip for connecting cables up to a diameter of 16mm to PV mounting systems. Suitable to slot into the back of all Channels MS 41 with min. profile thickness of 2mm.

Sound absorption lining for steel straps and pipe clamps.

Suitable for secure prevention of condensation at the pipe support location of chilled-water and cold-water pipelines as well as insulation clamp for heating systems. Suitable for soundproof installation according to DIN 4109.

Suitable for secure prevention of condensation at the pipe support location of chilled-water and cold-water pipelines as well as insulation clamp for heating systems. Suitable for soundproof installation according to DIN 4109.

Suitable for secure prevention of condensation at the pipe support location of chilled-water and cold-water pipelines as well as insulation clamp for heating systems. Suitable for soundproof installation according to DIN 4109.

Insulated pipe clamp made of PUR-foam for chiller plants and cool water systems.

Suitable for secure prevention of condensation water at the pipe support location of refrigeration and cold-water pipelines. An optimal diffusion-tight connection with the pipe insulation is easily and safely achieved by fixing usual insulation materials to the clamp faces using adhesive. Recommended up to -0°C at normal ambient condition.

Suitable for secure prevention of condensation water at the pipe support location of refrigeration and cold-water pipelines. An optimal diffusion-tight connection with the pipe insulation is easily and safely achieved by fixing usual insulation materials to the clamp faces using adhesive. Recommended up to -0°C at normal ambient condition.

Suitable for secure prevention of condensation water at the pipe support location of refrigeration and cold-water pipelines. An optimal diffusion-tight connection with the pipe insulation is easily and safely achieved by fixing usual insulation materials to the clamp faces using adhesive. Recommended up to -0°C at normal ambient condition.

Used for cold-water pipeline systems and refrigeration installations. Fixation of pipe lines degenerated from sound and vibration. First class sound absorption by means of soft foam. One size covers several pipe dimensions. Permissible pipe dia. tolerances are securely adjusted by the elastomer part which also prevents from condensation which may occur due to slots. No sealant is needed - the smooth adhesion of the pipe insulation at the front surface is possible. Suitable also for heavy loads.

Fixed Point Chilled Water Clamp for the absorption of axial forces. Especially used for risers. The contraction forces are transferred to the pipe clamp by a steel pressure ring welded to the perimeter of the steel pipe. The clamp is anchored to the building structure via an installed anchor bracket.

Connection element for Stabil D-3G Pipe Clamps sizes 15 up to 30 mm (with sound absorption lining up to 23 mm) for suspending pipe clamps underneath one another.

Ducting Clamp designed for installing spiral-seam ducts according to DIN 24145 for industrial ventilation systems.

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.

Designed for installing spiral-seam ducts for industrial ventilation systems (according to DIN 24145). For soundproof installation of pipes (according to DIN 4109).

Two-piece pipe clamp for simple installation of spiral-seam ducts. Suitable for soundproof installation according to DIN 4109.